Kettler Flexbox 600 Manual De Instrucciones página 43

Assembly of Flexbox
Important
Assembly and operation is described using the Flexbox 850 as an example and the description also
applies to the 600, 650 and 800 versions.
Preparatory tasks
 Unpack all Flexbox parts.
 Check all product and cargo bike components for damage, sharp edges or burrs.
 Contact specialist dealer if you detect any damage, sharp edges or burrs.
 Place the cargo bike on its stand.
 Secure cargo bike so that it doesn't roll away or fall over.
Fitting the base plate
Figure 2: Positioning the side walls on the cargo space
 Place base sections (3L) and (3R) on the cargo bike's cargo space (1).
Important
 Ensure that the milled grooves on both side walls face upwards.
 Position base sections (3L) and (3R) in such a way that the holes align with the screw mounts on the
cargo bike's cargo space (1).
 If necessary, prop up the side walls from below or have a second person hold them.
MY21K99_01_1.0_25.08.2023
3R
KETTLER Flexbox assembly instructions
3L
1
7