Kettler Flexbox 600 Manual De Instrucciones página 45

KETTLER Flexbox assembly instructions
2L
2R
Figure 5: Raising the side sections
 Raise both side sections (2L) and (2R).
1L
3 4
2
1R
Figure 6: Screwing the rear wall sections into position
 Screw both rear wall sections (1L) and (1R) into position on the frame (2) with 2 washers (3) and
2 countersunk screws [M6 x 25] (4) each.
Important
 Fasten countersunk screws with a torque of 6 Nm.
MY21K99_01_1.0_25.08.2023 9