Hisense LCR33D6NSE Manual De Instrucciones página 6

2.Put screw into the hole of rubber
supporting pad.
scr ew
rubber supporting pad
3.Make screw in alignment with the hole
on lower base cover . Fasten rubber
supporting pad to the base cover firmly
by a phillips s crew driver (not included).
phillips screw drawer
6
Leveling
The appliance should be level in order to
eliminate vibration. To make the appliance
level, it should be upright and both
adjusters should be in firm contact with
the floor. You can adjust the level by
screwing in or out to the appropriate
level from the front (use your fingers or a
suitable spanner).
Electrical connection
Caution! Any electrical work required to
install this appliance should be carried out
by a qualified or competent person.
Warning! This appliance must be grounded.
The manufacture declines any liability
should these safety measures not be
observe.