Helpful hints and tips
Energy saving tips
We recommend that you follow the tips
below to save energy.
Try to avoid keeping the door open for
long periods in order to conserve energy.
Ensure the appliance is away from any
sources of heat (Direct sunlight, electric
oven or cooker etc).
Don't set the temperature colder than
necessary.
Don't store warm food or evaporating
liquid in the appliance.
Place the appliance in a well ventilated,
humidity free, room. Please refer to the
instructions on installing your new
appliance.
T h e d i a g r a m s h o w s t h e c o r r e c t
combination for the shelves, designed to
be the most energy efficient configuration.
Hints for fresh food refrigeration
Do not place hot food directly into the
refrigerator or
Chiller compartment
as the internal temperature will increase
resulting in the compressor having to work
harder and will consume more energy.
Cover or wrap the food particularly if it has
a strong flavor.
Place food properly so that air can
circulate freely around it.
Hints for refrigeration
Meat (All Types) Wrap-ped in PVDC
(plastic) wrap:
Wrap and place on the shelf. Always
follow food storage times and use by
dates suggested by manufacturers.
Cooked food, cold dishes, etc.:
Dishes should be covered and may be
placed on any shelf.
Fruit and vegetables:
Fruit and vegetables should be wrapped
and stored under the Crisper box cover
part.
Butter and cheese:
Be wrap in airtight foil or plastic film wrap.
Milk bottles:
Bottles should have a lid and be stored in
the door racks.
Hints for the storage of frozen food
Only store frozen items temporarily in the
Chiller compartment. This compartment is
not intended for freezing, or long term
storage of frozen items.
Once defrosted, food will deteriorate
rapidly and should not be re-frozen. Do
not exceed the storage period indicated
by the food manufacturer.
Switching off your appliance
If the appliance needs to be switched off for
an extended period, the following steps
should be taken prevent mould on the
appliance.
1. Remove all food.
2. Remove the plug from the electrical outlet.
3. Clean and dry the interior thoroughly.
4. Ensure that all the doors are wedged
open slightly to allow air to circulate.
,
9