MoMi KIURU Manual De Instrucciones página 7

PRODUCT ASSEMBLY
To assemble the product press the folding button (E) located on the steering bar, and pull the handlebar
slightly until you hear "click", which means that the handlebar has been installed correctly.To use the
product as a ride-on, turn the seat around the steering bar (5) and pull it down (6) so it is parallel to the
platform of the scooter (7).
STEERING
The child steers the scooter by balancing the body. Twisting the scooter is done by tilting the steering rod
to the right or left. The steering rod should not turn.
FOLDING THE SCOOTER:
To fold the scooter press the button (E) and pull the handlebar up slightly and then push the handlebar
so that the bar is parallel to the platform of the scooter.
BRAKING:
The rear wheel fender is fitted with a brake. To start braking, press the fender.
NOTE:
Pressing the brake with your full body weight while the scooter is accelerating may lead to a sudden stop,
thus losing balance and harming your health.
HEIGHT ADJUSTMENT:
In order to adjust the height of the handlebar, unlock the quick release lever (B), by pressing the locking
buton (D) raise or lower the handlebar, then secure the quick release lever
ATTENTION:
Once the handlebar is at the correct height, make sure the locking button extends beyond the handlebar
rod, and that the clamp is tight and there is no slack.
PRODUCT MAINTENANCE:
1. The condition of the product should be checked regularly.
2. Cleaning and maintenance of the product must be performed only by an adult.
3. The product should be cleaned with a damp cloth or sponge. Protect against dust, moisture, water,
high and very low temperatures, and dropping etc.
4. Periodically check the tightness of screws and other parts.
5. Prolonged exposure to direct sunlight can bend plastic parts. Before each use of the bike, you
should carefully check whether the bike is not damaged and whether all screws securing the
individual elements of the bike are properly tightened. Keep the product in a dry place.
6. Use only certified spare parts. Use only original spare parts available from the manufacturer
EN 7