Publicidad
Idiomas disponibles
Idiomas disponibles
Precautions with the battery.
- Charge the battery 100% before using it for the first time. (5 - 8 hours).
- If it is not used for a long time, charge the battery 100% once a month.
- Temperatures below 4.5 ºC (40 ºF) and temperatures above 35 ºC (95 ºF)
they negatively affect battery life.
Battery charge.
1. Make sure the machine is off.
2. Connect the plug of the charging cable to the machine and plug the USB into a 5V adapter.
3. The charging light illuminates indicating that the battery is charging.
4. It should be left charging from 2 to 3 hours.
5. The indicator does not turn off when charging is complete, disconnect after 5 hours maximum.
6. Disconnect the cable and unplug it from the electrical outlet.
Optimize the battery life.
- Do not charge the battery after each use, wait until it has run out completely.
- Do not leave the machine plugged in for more than 5 hours.
- Once plugged in to charge, never interrupt the charge without being complete.
- If the machine is only used in long time intervals, charge before using for 2 to 3 hours.
User's guide.
Read carefully before you start using the appliance.
PUT AND REMOVE THE ADAPTERS.
- Before putting, removing or changing an adapter, be sure to turn off the machine.
- Put an adapter, hold the machine with one hand and with the other hand, aim and turn the
cutting adapter to the right (clockwise).
- To remove the adapter, hold the machine with one hand and with the other turn the adapter
cut counterclockwise (to the left) and remove it.
MICRO ACCESSORY. (Picture 1)
- Place the micro accessory in the machine.
- Keep the machine gently touching your face at a 45 degree angle.
- Use short, well-controlled movements to shave around your beard / mustache.
- Use your free hand to hold and stretch your skin. This facilitates hair cutting.
NOTE: The micro accessory adapter was designed to shave areas of detail around the beard / mustache /
sideburns. It was not designed to shave the entire face.
For a good shave and cut, use each adapter for the function that has been designed.
4
Publicidad
