Thulos TH-CP900 Manual De Instrucciones página 12

TRIM OF NECK EDGES AND SIDEBOARDS. (Picture 2)
- Remove the accessory adapter and leave the machine with the blades.
- With the edge of the blades touching the skin slightly, start cutting the edge of the
line of the pin. Use light and soft movements.
CUTTING THE NECK AREA. (Picture 3)
- You need a hand mirror to perform this operation on your own.
- Place the size trimmer accessory.
- Use your fingers to help lift the hair from the base of the head up.
- The index finger should be covering the roots of the hairs that are lifting to avoid
accidental cuts where you do not want to cut.
- With the other hand, hold the machine and cut the area of the neck until reaching the finger that
is covering the roots of the hair.
- Make sure that there are no loose hairs through the cutting area and make
Slow and gentle movements when cutting.
NOSE AND EAR ADAPTER. (Picture 4-5)
- Put the nose and ear accessory adapter in the machine.
- Insert the trimmer gently into the nostril or ear.
- Move gently in and out of the nose or ear and at the same time rotate.
- Avoid inserting the cutting unit more than 6 mm into your nostril or ear.
EYEBROW ADAPTER. (Picture 6)
- Put the accessory adapter for eyebrows.
- Gently guide the cutting unit without deviating along the line of the eyebrows or excel from your
own eyebrow.
5