Descargar Imprimir esta página

CAB THUMB32 Manual Del Usuario página 22

Publicidad

Idiomas disponibles

Idiomas disponibles

GROUP NAME
NO OF PRESET CHANNELS
A
4
B
4
C
8
D
8
E
8
F
32
NB: A group is visible only if it contains associated channels, otherwise it will be present and editable in the Setup Menu but
not visible and editable by the user in Group Mode.
6.3) EDIT PASSWORD TO ACCESS THE SETUP MENU
To access the advanced menu there is a 4-digit password supplied with the device. You can change the password and set your own.
1) press the
button and hold it down for at least 5 sec to enter the setup menu
2) scroll through the menu using the keys
3) enter the new password by scrolling the digits with the
4) type the password again to confirm.
The display shows OK to confirm the programming.
6.4) ENABLE OR DISABLE DEVICE BLOCK
The device can activate a block to enter the channel or group mode.
The unlock combination is available in the user instructions of this owner's manual and is intended to prevent unauthorized
access to the device. To activate or deactivate the block function proceed as follows.
1) press the
button and hold it down for at least 5 sec to enter the setup menu
2) scroll through the menu using the keys
3) select with the buttons
The display shows OK to confirm the programming.
22
CHANNELS INCLUDED
Ch1, Ch2, Ch3, Ch4
Ch5, Ch6, Ch7, Ch8
Ch9, Ch10, Ch11, Ch12, Ch13, Ch14, Ch15, Ch16
Ch17, Ch18, Ch19, Ch20, Ch21, Ch22, Ch23, Ch24
Ch25, Ch26, Ch27, Ch28, Ch29, Ch30, Ch31, Ch32
da Ch1 a Ch32
or
until reaching the Code mode, confirm with the button
or
until reaching the Bloc mode, confirm with the button
or
the option on(enabled) or Off(disabled), press the
or
button, press
to move to the next code box.
ENG
button to confirm.

Publicidad

loading