Zeiss Secacam 7 Instrucciones De Uso página 42

12. Connection to computer
Remove the memory card and insert it into a computer's card reader. If the computer does not have a card
reader, you can also connect the camera directly to the computer using the USB cable provided.
Connection via USB cable: Release the locking clip and open the camera. There is a USB-C port on the
right of the camera. You can connect the camera to your computer using the USB cable provided. Make
sure the camera is turned off when you connect it to the computer. When the camera is plugged in, it will
automatically turn on and "MSDC" appears on the display.
PC: The camera installs itself on the computer as an additional drive called "Removable disk". Double-click
to open this drive on the computer. Inside the "DCIM" folder is the "100MEDIA" folder with the captured
photo and video files. After 1,000 recordings, another folder is created, called "101MEDIA", "102MEDIA", etc.
However, the recordings are numbered consecutively. You can now copy or move the folder or individual files
to the computer.
Memory card reader: Using a memory card reader (not included), you can import photos and videos
directly from the camera's memory card to your computer. To do this, connect the memory card reader
to your computer and insert the camera's memory card into the slot. If necessary, please consult the
manufacturer's operating instructions.
13. External power supply
External power supply: In addition to the power supply via batteries, the camera can also be permanently
supplied with power via external power supplies with 12 V voltage and a current strength of at least 2 A. The
corresponding socket is located at the bottom of the camera. The hollow plug of the power adapter must
have an outer diameter of 4 mm and an inner diameter of 1.7 mm. Important: The positive pole must be
on the inside, the negative pole on the outside. Remove the batteries when operating the camera with an
external power supply.
External rechargeable battery: When using external rechargeable batteries for a long period of time, 12 V
lead-gel batteries are particularly suitable. With a capacity of 4.5 Ah, for example, these batteries are an ideal
long-term source of energy for the ZEISS Secacam. Please note that you must use a suitable cable with the
correct polarity (positive pole inside) in addition to the rechargeable batteries.
14. Care
Do not use any harsh cleaners such as methylated spirits, thinners, etc. to clean the camera housing and the
accessories provided. If necessary, clean the components using a soft, dry cloth.
42