Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
6. Mounting a Tool onto the Tripod
WARNING
• To reduce the risk of a tipping hazard, always
ensure the tripod is stable before and after
mounting tools or leaving the tripod unattended.
To stabilize the tripod, reposition the legs, adjust
the leveling. Do not use the tripod if it is not
stable or not level.
• Do not mount tools that exceed the maximum
weight capacity of the tripod or cause the tripod
to tip excessively. Just because the tool can be
attached to your tripod, it does not assure safe
operation.
a. Adjust the height and secure the legs.
b. Fold each light head (A) down.
c. Open the cap (C) of the mounting screw (B). Place the tool on the tripod mounting screw.
Make sure the screw properly engages the threaded hole on the tool.
d. Rotate the tool clockwise to secure it to the tripod.
NOTICE:
• Only tools with a 1/4"-20UNC threaded mounting hole can be secured to the tripod.
• The total weight of the mounted tool (with battery attached) not exceed 8.1 lbs (3.7 kg).
7. Tray
The tray (H) of the tower light can be used
to conveniently place small items, such as,
screwdriver, screws, tape, etc.
6
Mounting
hole
A
7
13
C
B
H
Publicidad
