Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
4. Operation(Fig 5)
Hold the handle (H) firmly with both hands and
maintain a firm grip through out the mixing
operation. The tool should be run at low speed
before it is immersed in or removed from the
mixture.
The speed should only be increased to
maximum after it has been fully immersed in the
mixture, in order to ensure that motor is kept as
cool as possible. The tool must be moved
around inside the mixing vessel during the
mixing process.
Continue the mixing process until all of the
mixing components have been processed.
NOTE: Always clean the mixing paddle (E) after you have finished using it.
CARE AND MAINTENANCE
WARNING
• When servicing, use only identical replacement parts. Use of any other parts may create a
hazard or cause product damage. To avoid accidents always disconnect the tool from the
power supply before cleaning or performing any maintenance.
General Maintenance
• Correct maintenance of the tool will prolong its useful life.
• The mixing paddle (E) must be cleaned after use or when they have not been used for a long
time. Always store your mixer in a dry place.
• The air vent on the motor housing must be kept clean and free of foreign matter. Do not
attempt to clean by inserting pointed objects through openings.
• Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage
from various types of commercial solvents and may be damaged bytheir use. Use clean
cloths to remove dirt, dust, oil, grease, etc.
• Use only original spare parts for the machine maintenance.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
5
14
H
E
Publicidad
