Descargar Imprimir esta página

Kenmore 116.36922 Manual Del Propietário página 12

Publicidad

Idiomas disponibles

Idiomas disponibles

MOTOR PROTECTION
SYSTEM
Motor Protector
This vacuum cleaner has a motor protector
by-pass valve which automatically opens to
provide cooling air to the vacuum cleaner
motor when a clog prevents the normal
flow of air to the motor. If the by-pass valve
opens to prevent motor overheating and
possible damage to the vacuum cleaner,
you will notice a change of sound as air
rushes through the valve opening.
To correct
problem:
See the TROUBLE-
SHOOTING
section.
NOTE: The motor
protector
may open
when using
attachments
or
when cleaning new
carpet, due to
reduced airflow
caused by the
attachments
themselves
or by
Motor Protector
new carpet lint filling
(BehindHose)
the dust bin quickly. See the
TROUBLESHOOTING
section.
Note: Do not block motor protector.
Thermal
Protector
This vacuum cleaner has a thermal
protector, which automatically
trips to
protect both the vacuum cleaner and the
agitator motor from overheating.
If a clog
prevents
the normal flow of air to the motor,
the thermal protector turns the motor off
automatically. This allows the motor to cool
in order to prevent possible damage to the
vacuum cleaner.
To correct
problem: Turn the vacuum
cleaner off and unplug the power cord from
the outlet to allow the vacuum cleaner to
cool and the thermal protector
to reset,
Check for and remove clogs, if
necessary.
See page 19, CLOG
REMOVAL
section. Also check and
replace
any clogged filters. Wait
approximately
thirty (30) minutes
and
plug the vacuum
cleaner
in and turn
back on to see if the motor protector
has
reset.
AGITATOR MOTOR
OVERLOAD
PROTECTOR
The agitator motor has built-in protection
against motor damage should the agitator
jam. If the agitator slows down or stops, the
agitator overload protector
shuts off the
agitator motor. The vacuum cleaner motor
will continue to run.
To correct
problem:
Turn off and unplug
vacuum
cleaner, remove obstruction,
then
press reset button.
To reset: Push in
the agitator
overload
protector
button.
Agitator Motor
Overload Reset
Button --_
f
If the problem
persists, have the vacuum
cleaner serviced
by a Sears or other
qualified
technician.
12

Publicidad

loading

Este manual también es adecuado para:

116.36923