Publicidad
Idiomas disponibles
Idiomas disponibles
I A
Please pay special attention to these hazard alert boxes, and follow any instructions
I
I
given. WARNING statements alert you to such dangers as fire, electric shock, burns
I
and personal injury.
CAUTION
statements
alert you to such dangers as personal
injury and/or property damage.
WARNING
Electrical
Shock
Hazard
Do not plug into the electrical
supply
until the assembly
is complete.
Failure
to
do
so
could
result
In
electrical
shock or injury,
Before assembling the vacuum cleaner,
check the PACKING
LIST on the cover of
the separate REPAIR
PARTS LIST. Use
this list to verify that you have received all
the components
of your new Kenmore
vacuum cleaner.
HANDLE ASSEMBLY
Remove
the combination
brush from
the handle to expose the handle mount-
ing hole.
Remove the handle screw from the body
of the vacuum.
Position the handle assembly as shown in
the illustration
below.
When installing
the handle, firmly press
the handle onto the body. Secure with
handle screw provided.
Begin to tighten the screw with your fin-
gets. It may be necessary
to adjust the
handle slightly.
Using a screwdriver, tighten handle screw.
Reinstall combination brush.
Electrical
Connection
Handl,
Assembly
Handle
Screw
CAUTION
Do not overtighten.
Overtightening
could strip the screw
holes.
Do not operate
the cleaner
without
the screw in place.
CORD ASSEMBLY
Make sure the quick release upper cord
hook is in the upright position. Remove
the wire tie from the power cord.
Make sure the
power cord
is
placed into the lock-
ing notch on the
body as shown. This
helps keep the
power cord out from
under the vacuum
cleaner agitator.
Release
Cord Hook
Cord
Carrying
Handle
Plug
Wrap the power cord around the quick
release cord hook and the carrying handle.
Lock the power cord plug onto the power
cord.
Publicidad
