ADE CM 2300 Instrucciones De Operación página 17

Start-up
Unpacking and checking
1. Remove all parts from the packaging and carefully remove all the packaging material.
2. Check that the delivery is complete.
3. Check the mirror or accessories for any visible damage. If any damage is found, do not
use the device. In this case, go to the retailer where you bought the set.
Mounting and setting up the mirror
Powering the mirror
The mirror can be powered by four LR6 (AA)/1.5 V batteries or via the USB interface.
Battery operation
1. Push the locking tab of the battery compartment towards the battery compartment
cover and remove it.
2. Insert four batteries as indicated at the bottom of the battery compartment. Pay
attention to the correct polarity of the batteries (+/-).
3. Replace the battery compartment cover.
Makeup mirror CM 2300
1. Adjust the mirror stand to a 30° angle between the
stand and the mirror.
2. Fit the mirror stand into the base plate recess until
it clicks into place.
3. Place the mirror on a stable and vibration-free surface.
Start-up
17