ADE CM 2300 Instrucciones De Operación página 18

Use
Notes on changing the battery:
‚ Make sure to change the batteries when the lighting is dim or when the
mirror no longer lights up.
‚ Only use the battery type specified in "Technical data".
‚ Always change all batteries at the same time.
‚ Dispose of the old batteries in an environmentally responsible way (see
"Disposal").
Operation via USB
1. Connect one end of the USB cable to the USB socket on the back of the device near the
on/off switch.
2. Connect the other end of the cable to the USB socket or plug the device into the mains
outlet using the USB power adapter.
Use
To switch the LED lighting on and off:
− Press the on/off switch (I/O) on the back of the mirror.
To adjust the brightness/light colour:
− Switch on the LED lighting.
− Brightness: Press the sensor field a little longer.
− Light color: Briefly tap the sensor field (warm white/cold white).
The mirror features a memory function. The brightness at which you last used
the mirror is preset when you switch it on later.
18
− Fold the side pieces to the side.
− You can tilt the mirror up to 180° and it has different
magnification ranges.
Makeup mirror CM 2300