Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATIONS (Continued)
V-CHIP SET UP
V-CHIP enables parents to prevent their children from watching inappropriate material on TV.
V-CHIP reads the ratings for programming (except for news and sports programs, unedited
movies on premium cable channels, and Emergency Broadcast System signals), then denies access
to programming if the program's rating meets or exceeds the limitations you select. In this case,
"PROTECTED PROGRAM by ..." message appears on the TV screen.
To block certain ratings, follow the steps below.
Programming may be rated by the Motion Picture Association of America (MPAA) or accord-
●
ing to the Television Parental Guidelines. In order to block any inappropriate programming, set
your limits in both places (MPAA RATING and TV RATING).
You cannot access the menu when the "PROTECTED PROGRAM by ..." message appears. In
●
this case, change to an unblocked channel, then press the MENU button.
[MPAA RATING SET UP]
1) Press the MENU button so that the menu display appears on the TV
screen.
2) Press the CH(annel) ▲ or ▼ button to point to "V-CHIP SET UP".
Then press the VOL(ume) ▲ button.
3) Press the CH(annel) ▲ or ▼ button to point to "MPAA RATING".
Then press the VOL(ume) ▲ button.
4) Press the CH(annel) ▲ or ▼ button to point to your desired item.
Then press the VOL(ume) ▲ button to select [BLOCK] or [VIEW].
<Selection>
<Rating Category Explanations>
• G :
General Audience
• PG :
Parental Guidance suggested.
• PG-13 :
Unsuitable for children under 13
• R :
Restricted; under 17 requires accompanying parent
or adult guardian
• NC-17 :
No one under 17 admitted
• X :
Mature audience only
When you select the rating category and set it to [BLOCK], the higher rating will change to
●
[BLOCK] automatically. Also, the lower rating will change to [VIEW] automatically.
When you change "G" to [BLOCK] or [VIEW], the all ratings will change to [BLOCK] or
●
[VIEW] automatically.
When you change "X" to [VIEW], then all ratings will change to [VIEW] automatically.
●
5) Press the MENU button to exit the menu.
TROUBLESHOOTING GUIDE
Sometimes a performance problem can be easily solved by checking seemingly apparent but often over-
looked possibilities. Before arranging for service, check these items. It could save you time and money.
QUICK SERVICE CHECK LIST
POSSIBLE REMEDY
Try a new channel, if OK, then possible station trouble.
Is TV plugged in?
Power at outlet?
Is TV's POWER button on?
Is antenna connected to terminal on the back of the set?
If outside antenna is being used, check for broken wire.
Check for local interference.
Turn off with POWER button and then turn it on after about a minute.
Adjust COLOR control.
Adjust CONTRAST & BRIGHT control.
Check batteries in Remote Control.
Move the TV away from the nearby appliances which have Magnetism.
Turn off using the POWER button, then turn it on again 30 minutes later or so.
Closed Caption Problem
My TV is showing captions that are
You are watching a live broadcast and spelling errors made by the
misspelled.
closed captioning production company may pass through uncorrect-
ed. A prerecorded program will not show any misspelled words
because of the normal time available for editing the captions.
My TV will not show the text in its entirety
Captions that are delayed a few seconds behind the actual dialogue
or there is a delay of what is being said.
are common for live broadcasts. Most captioning production compa-
nies can display a dialogue to a maximum of 220 words per minute.
If a dialogue exceeds that rate, selective editing is used to insure that
the captions remain up-to-date with the current TV screen dialogue.
My captions are scrambled with white
Interference caused by building, power lines, thunderstorms, etc.
boxes on the TV screen.
may cause scrambled or incomplete captions to appear.
My program guide listed a TV show as
Broadcasters may at times use a time compression process to the
being closed captioned
actual program so that additional advertising time can be given.
but none of the captions were displayed.
Since the decoder cannot read the compressed information, captions
will be lost.
My prerecorded videotape does not show
The videotape was either an illegal copying or the tape duplicating
any captions. The tape box mentions it
company accidentally left out the captioning signals during the
being closed captioned.
copying process.
My TV screen shows a black box on certain
You are in the TEXT mode. Select CAPTION mode or CAPTION
channels.
[OFF].
®
As an E
NERGY
S
TAR
Partner, our company has determined that this product meets
the E
S
®
guidelines for energy efficiency. E
NERGY
TAR
All manuals and user guides at all-guides.com
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
B V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
TV RATING
B MPAA RATING
B G
PG
PG-13
R
NC-17
X
Possible Remedy
S
®
is a U.S. registered mark.
NERGY
TAR
[TV RATING SET UP]
1) Press the MENU button so that the menu display appears on the TV
screen.
2) Press the CH(annel) ▲ or ▼ button to point to "V-CHIP SET UP".
Then press the VOL(ume) ▲ button.
3) Press the CH(annel) ▲ or ▼ button to point to "TV RATING".
Then press the VOL(ume) ▲ button.
4) Press the CH(annel) ▲ or ▼ button to point to your desired item.
Then press the VOL(ume) ▲ button to select [BLOCK] or [VIEW].
<Selection>
<Rating Category Explanations>
• TV-Y :
Appropriate for all children
• TV-Y 7 :
Appropriate for children seven and older
• TV-G:
General Audience
• TV-PG :
Parental Guidance suggested.
• TV-14 :
Unsuitable for children under 14
• TV-MA :
Mature audience only
When you select the rating category and set it to [BLOCK], the higher rating will change to
●
[BLOCK] automatically. Also, the lower rating will change to [VIEW] automatically.
When you change "TV-Y" to [BLOCK] or [VIEW], then all ratings will change to [BLOCK]
●
or [VIEW] automatically.
When you change "TV-MA" to [VIEW], then all ratings will change to [VIEW] automatically.
●
When you select TV-Y7, TV-PG, TV-14, or TV-MA and you press the VOL(ume) ▲ button,
the sub-ratings will appear on the TV screen.
If you select the rating category (example: TV-PG) and set it to [BLOCK] or [VIEW], the sub-
ratings (example: V for Violence) will change to [BLOCK] or [VIEW] automatically.
You can set the sub-ratings to [BLOCK] or [VIEW] individually when the
[VIEW]
[VIEW]
rating category is set to [BLOCK]. To set the sub-ratings individually, follow
[VIEW]
[VIEW]
the steps below.
[VIEW]
[VIEW]
When you select [TV-Y7]:
●
Press the CH(annel) ▲ or ▼ button to select "FV" (Fantasy Violence).
Then press the VOL(ume) ▲ button to select [BLOCK] or [VIEW].
When you select [TV-PG], [TV-14] or [TV-MA]:
●
Press the CH(annel) ▲ or ▼ button to select "D" (Suggestive Dialog),
"L"(Coarse Language), "S"(Sexual Situation), or "V" (Violence).
Then press the VOL(ume) ▲ button to select [BLOCK] or [VIEW].
Notes :
When you select [TV-MA], "D" does not appear on the TV screen.
●
The sub-ratings set to [BLOCK] appear next to the rating category in the
●
TV RATING menu.
5) Press the MENU button to exit the menu.
MAINTENANCE
CABINET CLEANING
Wipe the front panel and other exterior sur-
●
faces of the TV with a soft cloth immersed
in lukewarm water and wrung dry.
Never use a solvent or alcohol. Do not spray
●
insecticide liquid near the TV. Such chemi-
cals may cause damage and discoloration to
the exposed surfaces.
SUPPLIED ACCESSORIES
Remote control unit
(NE122UD)
Batteries ("AA" x 2)
SPECIFICATIONS
GENERAL SPECIFICATIONS
Television system:
NTSC-M
TV Standard
Closed Caption
System:
§15.119/FCC
Channel coverage
VHF:
2 ~ 13
UHF:
14 ~ 69
CATV:
2 ~ 13, A ~ W,
W+1 ~ W+84,
A-5 ~ A-1, 5A
Tuning System
181 channel
frequency synthesized
tuning system
Channel access:
Direct access keyboard,
programmable
scan and up/down
Terminals
Antenna input:
VHF/UHF/CATV
75 ohm unbalanced
(F-type)
S-Video input:
Mini DIN 4-pin jack
Video input:
RCA connector x 2
Audio input:
RCA connector x 4
Stereo Sound System
2 speakers
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
B V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
B TV RATING
MPAA RATING
B TV-Y
[VIEW]
TV-Y7(
) [VIEW]
TV-G
[VIEW]
TV-PG(
) [VIEW]
TV-14(
) [VIEW]
TV-MA(
) [VIEW]
TV-Y7
[BLOCK]
B FV
[BLOCK]
TV-PG
[BLOCK]
B D
[BLOCK]
L
[BLOCK]
S
[BLOCK]
V
[BLOCK]
B TV-Y
[VIEW]
TV-Y7(
) [VIEW]
TV-G
[BLOCK]
TV-PG(DLSV)[BLOCK]
TV-14 (DLSV)[BLOCK]
TV-MA( LSV) [BLOCK
PICTURE TUBE CLEANING
Wipe the picture tube of the TV with a soft
cloth. Before cleaning the picture tube, discon-
nect the power cord.
Owner's Manual
Owner's
Manual
(1EMN20055)
ELECTRICAL SPECIFICATIONS
Sound output:
2W, 8 ohm x2
OTHER SPECIFICATIONS
Remote control:
Digital encoded
infrared light system
Operating
temperature:
5°C to 40°C
(41°F~104°F)
Power requirements: AC120V, 60Hz
Power consumption
(Maximum):
125W
Picture tube:
27"PF
Dimensions:
H : 24-5/16" (617mm)
W: 27-1/16" (688mm)
D : 19-7/8" (505mm)
Weight:
92.6 lbs. (42kg)
•Designs and specifications are subject to
change without notice and without our
legal obligation.
•If there is a discrepancy between languages,
the default language will be English.
]
Publicidad
