Zipper sliders correctly positioned at
the bottom.
ATTENTION
• Check that the teeth on both zippers have
engaged properly and are sealed.
• Both zipper sliders must be positioned at
their lowest position and not at the top,
otherwise the airbag will not deploy fully.
• Ensure that the zipper cover once again
covers the zipper.
4.6.3. Secondary
deployment option
Supercapacitors in the LiTRIC Avalanche
Airbag power the airbag's deployment.
Once the airbag is deployed, the built-in
lithium-ion battery automatically and
instantly begins to recharge the superca-
pacitors, so they are ready for deployment
again. In order for this to occur, the LiTRIC
airbag must be correctly repacked, the
LiTRIC System must be switched ON, and
the lithium-ion battery must have suffi-
53
cient charge (see point 4.3). Charging
time is approximately 25 minutes.
Once the system is charged and ready for
one deployment, it will automatically run a
brief motor test and the LED lights will
indicate the system's charge status. The
LiTRIC airbag system is then ready to
deploy.
DE
EN
FR
IT
ES
CZ
NL
NO
PO
SE
日 本語
中 國人