Descargar Imprimir esta página

Bresser MeteoTemp Baro HZ colour Manual De Instrucciones página 21

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 58
6. Format 12/24H > Temperature unit >Barometer unit >Time zone > Hour > Minute>Year >
Month>Date >Language of weekday
7. Finally, press the MODE button to save the settings and exit the settings mode.
8. In normal mode, press the MODE button to check the alarm time.
13 Time zone setting
To set a different time zone, proceed as follows:
1. Press and hold MODE button for approx. 3 seconds to change to time setting mode.
2. Press the MODE button multiple times until the display shows the time offset 00 Hr.
3. Press UP or DOWN button to select the desired time deviation in hours (-12 up to +12 hours).
4. Finally press the MODE button to save the settings and exit the setting mode.
14 Alarm setting
1. In normal mode, press the MODE button to check the alarm time.
2. When you have checked the alarm time, press the UP button to turn the alarm on or off.
3. When you enter the alarm mode, press and hold the MODE button for about 3 seconds to enter
the alarm setting mode. The digits to be set will flash. Press the UP or DOWN button to change
the value. Press the MODE button to confirm and proceed to the next setting. Sequence of set-
tings: Hour> Minute. Press the MODE button to save the settings and exit the alarm setting mode.
15 Snooze function
1. When the alarm sounds, press SNZ button to activate the snooze function. The alarm will sound
again in 5 minutes.
2. Press any other button when the alarm sounds to interrupt the alarm until the alarm time will be
reached again.
16 Switching on temperature alert and/or ice
alert
1. In normal display mode, press the DOWN button to activate or deactivate the temperature alert,
the ice alert or both in succession.
2. In normal mode, press and hold DOWN button for about 3 seconds to enter the outdoor temperat-
ure alert setting mode, the digits to be set will flash, press UP or DOWN button to change the
value, press MODE button to move to the next setting. The sequence of settings is outdoor HI
temperature > outdoor LO temperature.
17 Weather trend
A weather trend for the next 12-24 hours is calculated from the measured values and graphically
displayed as follows:
1
2
Illustration 3: The weather trend indicators on the base station display
3
4
5
6
21 / 72

Publicidad

loading

Este manual también es adecuado para:

7007520