Publicidad
Idiomas disponibles
Idiomas disponibles
Assembling The Bin Support Assembly
Locatethe uprightsupport bracketand the bin supportassembly.
Assembleit by followingthese steps:
1.
Laythe bin supportassemblytopsidedownwith the mounting
bracketportionfacingupwards.
2.
Insertthe notchedend of the verticalsupportbracketintothe bin
supportassembly,as in Fig. 4-3,and securewith a carriagebolt
(710-0276) and flangelock nut (712-04063)packedin with the
uprightsupportbracket.See Fig.4-4.
Figure
4-3
Figure 4-5
Installthe clevispin (711-0309A) f rom hardwarepack689-00097
intothe tractor'shitch and the assembly'shitch supportand
securewith a hairpinclip (714-0117) i nthe top hole (closestto the
headof the pin). See Fig.4-6.
Figure 4-4
Mount Assembly on Tractor
Installthe mountingassemblyon the tractoras follows:
1.
Slide thebagger mountingassemblyalongthe top of the frame
rails, as in Fig.4-5, untilthe assemblyhooksunderthe shoulder
bolts on the tractor.At this pointthe hitch supportholeon the
mountingassemblyand the hole on thetractor'shitch platewill
line up.
Figure 4-6
NOTE:Theclevispin can be feddownthroughthehitch supportand
securedunderneathwith the hairpinclip, as seenin Fig. 4-6, or it may
be easiertofeed the clevispin up throughthe hitchplate holeand
securewith the hairpinclip on the topside.Thelatter methodmaybe
preferredsince itcan be easierto insertthe hairpinclip. Eitherway will
work;the decisionshouldbe basedon operatorpreference.
3.
Tightenall of the hardwaresecuringthe hitchsupportat this time.
9
Publicidad
