UK
Cleaning, Care and Maintenance
•
Always switch off the power and disconnect the appliance from the power supply before cleaning.
•
The inner body of the appliance should be wiped down at the end of each day's operation. Additional
cleaning may be required depending on frequency of use.
•
The crumb tray, wire racks, display panel and glass doors can be removed and washed if necessary.
•
Warm soapy water is recommended for cleaning. Cleaning agents may cause damage or leave harmful
residues when used for a prolonged period on stainless steel.
•
A BUFFALO dealer or qualified technician should carry out repairs if required.
Troubleshooting
If your BUFFALO Pie Warmer develops a fault, please check the following table before making a service call.
Fault
The unit is not heating
up and the indicator
light is Off
The unit heats up but
the indicator light is Off
The unit is not heating
up or heats up slowly
and the indicator light is
On
Technical Specifications
Model
Voltage
Power
W810
230
1850W
50Hz
W811
230,
2000W
50Hz
3
Probable Cause
The unit is not switched on
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
Indicator light is faulty
Incorrect operation
Thermostat failure
Element failure
Thermometer displays wrong
temperature
Dimensions
Current
w x d x h
(mm)
8A
593 x 359 x
501
8.7A
581 x 753 x
359
Check the unit is plugged in correctly and
switched on
Call BUFFALO agent or qualified technician
Replace the plug fuse
Check power supply
Call BUFFALO agent or qualified technician
Call BUFFALO agent or qualified technician
Ensure:
•
thermostat has been set correctly
•
doors are closed
•
thermostat sensor bulb has not been
removed or damaged
Call BUFFALO agent or qualified technician
Call BUFFALO agent or qualified technician
Call BUFFALO agent or qualified technician
Approx.
Weight
Pie
(kg)
Capacity
(to 90°C)
21.6
50
27.1
100
Action
Heat up
Operating
Time
Temperature
Range
5 minutes
20 - 90°C
5 minutes
20 - 90°C