Descargar Imprimir esta página

KSIX METEOR Manual De Usuario página 3

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 6
Voice assistant
How to reset the earphones
To reset the earphones disconnect them, access your smartphone's Bluetooth settings, tap on KSIX
METEOR and tap on "Unpair". Place them on the charging case, take them out and repeat the pairing
process.
Charging the earphones
To charge the earphones, simply place both inside the charging case, close the cover and they will start
to charge automatically. The LED charging case indicators will light up for 5 seconds and the earphones
LED indicators will flash red and blue 3 times. Make sure that both earphones are properly introduced in
the case.
It takes about 1 and a half hours to charge the earphones up to full.
Charging the charging case
The charging case incorporates a USB-C port. The green LED charging case indicator will light up for 5
seconds when charging the earphones. When the charging case's battery is low, this LED indicator will
flash green light for 5 seconds.
It takes about 2 and a half hours to charge the charging case up to full. With the charging case being fully
charged, you will be able to charge your earphones up to full about 7 times.
Troubleshooting: If the charging case LED indicator does not turn on during its charge, it should be due
to a power supply issue. Please, check if the charging cable is correctly connected to the charging case.
Check both ends of the cable, as well as the power supply state and the device you are using to charge,
whether it is a wall charger, a powerbank or a PC port.
Maintenance recommendations
• Regularly clean the product with a dry cloth. The product must be disconnected or
switched on when you clean it.
• Keep the connectors and/or ports free from dust, lint, etc. to prevent improper
connections.
• Avoid breaking the device. Do not put objects over it or bend it too strong.
• If the product includes a cable do not bend it too strong and do not pull from it to unplug
the product.
• Do not wet the product. Keep it always in a dry place, away from humidity.
• When not using the product, store it in a place free from dust, dirt, lint, liquids, etc.
• If water or other liquids enter the product interior, unplug it immediately from any
attached power source or device it is connected to.
• Avoid dropping or hitting the product. It might be damaged.
• Do not use the product for anything other than its intended use.
• Please recycle the product in accordance with local environmental laws and regulations.
To activate the voice assistant, tap the left or right earphone
during 2 seconds.

Publicidad

loading

Este manual también es adecuado para:

Bxtw10nBxtw10rBxtw10pl