Calypso Watches IKMK5801M Manual De Instrucciones página 4

I
ENGLISH INSTRUCTION MANUAL
FEATURES AND SPECIFICATION
(LIGHT) S4
AFTERNOON
HOURS
ALARM SIGNAL
(MODE) S3
CHIME SIGNAL
1. Accuracy at normal temperature: not more than 30 seconds a month.
2. Time keeping mode: hours, minutes, seconds, month, date, day of week, "PM" (only
available in 12 hour format).
Press S1 to read month and date.
3. Alarm Mode: daily alarm.
4. Timer Mode: Measuring unit: 1 second
Input range: from 1 second to 23:59'59"
5. Stop watch Mode: Measuring unit: 1/100 of second
measuring capacity: 23:59'59"
6. Normal operating temperature range:10"C-40"C.
7. Battery type: CR2016.
While advancing, hold 51 can lasten the process
ALARM & CHIME ON/OFF
From the normal time display, press 53 twice to read the alarm time. Press S 1 to actívate
or turn off the alarm and/or chime. When chime is on, the chime signal appears and there is
one beep every hour. When alarrn is on, the alarm signal appears.
HOW TO CHANGE DISPLAY MODE
From the normal time display:
• 1. Press S3 to enter Chronograph
• 2. Press S3 to enter Alarm
• 3. Press S3 to enter Count down timer
• 4. Press S3 to enter Second zone time
• 5. Press S3 to return to normal time display
HOW TO SET NORMAL TIME/CALENDAR
From the normal lime display, press S2 once, seconds are now flashing.
Press S1 to reset to 00 (if seconds in the range of 30 to 59, minutes will add 1; if seconds in
the range of 00 to 29, minutes will not be changad.)
1. Press S3- hours will flash-advance by pressing S1
2. Press S3- minutes will flash-advance by pressing S1
3. Press S3- month will flash-advance by pressing S1
4. Press S3- date will flash-advance by pressing S1
5. Press S3- day will flash-advance by pressing S1
6. Press S3- 12/24 hour formal will flash-change by pressing S1
While advancing, hold 51 can lasten the process. Press 52 al any stage to return to normal
display.
DAY OF WEEK
DATE
S1 (START/STOP)
MINUTES
TIMER SIGNAL
CHRONOGRAPH SIGNAL
S2 (SET)
SECONDS
IKMK5801M
HOW TO SET SECOND ZONE TIME
From normal time display:
• Press S3 tour times to read 2"' zone time. To set 2"' zone time:
• Press S2 once-hours will flash, Press S1 to advance (+1 hour)
• Press S3-minutes will flash, Press S1 to advance (+30 minutes or -30 minutes) Press S2 to
exit setting
• Press S3 to return to normal lime display
HOW TO USE THE CHRONOGRAPH
From the normal time display, press 53 once to enter chronograph function.
Simple usage:
• Press S1 to start counting
• Press S1 again to stop counting
• Press S2 to reset to zero
• Press S3 to return to normal display (this can be done at any time with the chronograph still running)
Advanced usage (LAP function):
• Press S1 to start counting
• Press S2 , first time split T1 (O to T1) shows. The numbers stop flashing, but chronograph is
still counting in fact.
• Press S2 again to continua counting
• Further press S2, !he second split time T2 (O to T2) shows. This operation can be repeated
and the splits time can be read: O to T3, O to T4 etc.
• Press S1 to stop the time counting of the chronograph.
• Press S2, the last split time Tn (O to Tn) shows.
• Press S2 again, the chronograph is reseted to zero. Press S3 to retum to normal display.
HOW TO SET ALARM TIME
You can set alarm with hours and minutes. When the alarm is on, the alarm(BI-BI) sound
for 20 seconds at the preset time. Press S1, S2 or S3 to stop the alarm alter il starts sound.
Alarm on is available in one zone time only(T1 or T2).
From the normal time display, press 53 twice to read the alarm time.
To change the alarm setting:
• Press S2 once-hours will flash, Press S1 to advance
• Press S3-minutes will flash, Press S1 to advance
• Press S3-AL. T1/AL. T2 will flash, Change by pressing S1
• Press S2 to exit setting
• Press S3 to return to normal time display
HOW TO USE TIMER
From the normal time display, press 53 three times to enter. To set countdown timer:
• Press S2-hours will flash-advance by pressing S1
• Press S3-minutes will flash-advance by pressing S1
• Press S3 again-seconds will flash-advance by pressing S1
• Press S2 to stop setting
• Press S1 to start countdown timer. Press S1 again to stop the countdown timer.
• While the timer is running, press S2 to reset !he countdown time to its starting value.
Within the setting time 3 minutes, there is an alarm (BI-BI) when !he seconds digit is "O" or "30".
Within the setting 10 seconds, there is an alarm (BI) per second.
When timer expirad, the alarm (BI-BI-BI) lasting 10 seconds, it will be silenced by press S1,
S2 or S3. Press S3 to retum to normal time display.