Publicidad
Idiomas disponibles
Idiomas disponibles
JnstaJlationinstructions
[] WINDOW REQUIREMENTS
* These instructions (]re for a standard double-hung
window. You will need to modifg them for other tgpes
of windows.
o The air conditioner can be installed without the
side curtain if needed to fit in (] narrow window.
See the window opening dimensions.
o All supporting parts must be secured
to firm wood, m(]sonrg or metal.
o The electrical outlet must be within reach of the
power cord.
o Follow the dimensions in the table and illustration
for our model.
B==4]
L
!2" 3/8"
_23
1/4"- 36"
--mL_
With side curtain
|/
T
¢
j_ STORMWINDOW REQUIREMENTS
A storm window frame will not allow the air
conditioner to tilt toward the outside, and will keep it
from draining properlg.
To adjust for this, attach (] piece of wood to the sill.
WOOD PIECES
WIDTH:2"
LENGTH:Long enough to fit inside the window
frame.
THICKNESS: To determine the thickness, place (]
piece of wood on the sill to make it 1/2" higher than
the top of the storm window frame or the vingl
frame.
Attach securelg with nails or screws provided bg the
installer.
1/2" higher
than storm
window
frame
Storm window
frame
1/2" higher
than vin91frame
_ (onsome windows)
_
Wood
171PREPARETHE AiR CONDITIONER
[]
Install the top mounting
rail with 3 Tgpe A
screws from the outside of the case.
Top mounting rail
r_
Slide curtain panel into side rails.
r_
Slide left and right side curtain frames into top
and bottom
mounting
rail. Hake sure curtain
snaps into place.
Top mounting rail
Top ight
Top left
_
_/
Bottom mounting rail
8
Publicidad
