OZ Lifting Products WHEEL BASE OZWB Serie Manual Del Operador página 17

OPERATION
Assembling The Crane
Please refer to your crane Operator's Manual for assembly of the crane.
Installing A Pedestal Base To A Wheel Base
2
3
4
1
5
Figure 7
®
NOTE: The accompanying bases for the OZ Lifting Products, LLC davit cranes are sold separately
®
through OZ Lifting Products, LLC dealers. They are necessary for proper operation of this product.
1. Install the pedestal base (Item 1) to the Wheel Base (Item 5) using 1/2-13 grade 5 coarse thread bolts (Item 2),
lock washers (Item 3), and fl at washers (Item 4). A torque of 80 ft/lb should be used for grade 5 fasteners without
lubrication.
Non-standard products that have been changed from the original design may have other fastening requirements.
®
Contact your OZ Lifting Products, LLC dealer for more information.
Installing The Cable
Please refer to your crane Operator's Manual for assembly of the crane.
Wheel Base Operator's Manual • OZ Lifting Products, LLC ® • 1/2024 17