cecotec PUMBA 1600 PURRFECT MEAL Manual De Instrucciones página 32

ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1. LCD display
2. USB power connector
Fig. 2
1. On/Off switch
2. Speaker output
3. Power supply *3 "D" battery covers (not included)
Fig.3
1. Food feeder protective cover
2. Feeder body and rotating mechanism
3. Food tray with 5 separate compartments
NOTE:
the graphics in this manual are schematic representations and may not exactly match the
device.
2. BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the device out
of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the device when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Box content
- Food feeder
- USB cable
- Instruction manual
3. INSTALLATION
1. Turn the cover as shown in the picture to open it. After pouring in the food, replace the
cover and turn it to lock it in place.
To open the cover
- Pull the handle to open the cover. Fig 4.
- Do this as shown in the picture. Fig. 5
- Lift the cover upwards. Fig. 6
To close the cover:
- Align position A with position B. Fig.7
- Insert the tabs of the cover into the holes. Fig.8
32 PUMBA 1600 PURRFECT MEAL