Maintenance
REPLACING FILTERS
When filters need replacing, use only genuine replacement
filters available by calling our customer support team.
Replace filters that are damaged with punctures, bends, or
broken frames .
- Turn off the range hood and disconnect the power .
- Remove the used or damaged filter and replace it with a
new filter, then reconnect the power.
REPLACING LIGHT BULB
When light bulb burns out, replace tit with a 40 W E26 base
light bulb .
- Turn off the range hood, disconnect it from its power
source, and ensure that the lights are cool .
- Turn the bulb counter-clockwise and pull it out to remove it.
- Push in the new bulb and turn it clockwise . Do not
release the bulb until you are sure the bulb has been
securely installed . Then reconnect the power .
- If new bulbs do not operate, ensure that they are
inserted correctly .
QR061SS
DANGER:
Turn off the power circuit breaker or the power
switch on the junction box before performing maintenance .
Touching circuitry inside the range hood while it is energized
will result in death or serious injury .
WARNING:
Failure to replace worn out or damaged filters
will increase the risk of fire.
WARNING:
Light bulbs can become hot when turned on .
Do not touch bulbs until they are switched off and cooled .
Touching hot bulbs could cause serious burns .
14