Publicidad
Idiomas disponibles
Idiomas disponibles
Problems
Cleaning is finished but
small dust particles come
out of the brush.
Vacuum cleaner stops
operation during
cleaning.
Static electricity occurs
when cleaning a thick
and soft mat.
30
English
• After cleaning, operate the vacuum for 10 seconds or more on
the MAX setting to suction up the small dust particles.
• The vacuum cleaner's motor will shut off to prevent overheating:
– When the vacuum operates with a full dustbin.
– When the vacuum operates with suction part or brush clogged.
– When the Extension Crevice Tool is used for long hours.
• After correcting the cause of the problem, turn the product
on again. (This case may differ depending on the ambient
temperature.)
• Some types of mats such as a (childcare center mat or a noise
prevention mat for between floors, etc.) may cause static
electricity.
– Move the brush on a normal floor for a while and clean again.
This should get rid of the static electricity.
Solutions
Publicidad
