Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
Using the clean station
The clean station is compatible with the provided dustbin only.
1
PUSH
button
Press the [PUSH] button on the upper cover of
the clean station.
2
Product
status
indicator
Insert the dustbin into the clean station. Dust
is ejected automatically.
• When the clean station is in operation, the
status indicator turns 'blue'.
• Press the [Start/Stop] button to stop
operation.
3
When the clean station's operation stops
completely, pull the dustbin out and close
the clean station by pressing the upper cover
firmly.
NOTE
• If dust still remains inside the dustbin even
after using the clean station, press the
[Start/Stop] button to operate the clean
station.
– Press the button again to stop operation.
• If the dustbin is filled with dust and will
not eject it properly, push the washable
Start/Stop
micro filter down with your hand, and then
button
operate the clean station.
• When there are foreign object residues,
remove them by referring to 'Maintaining
the clean station' section of the manual.
CAUTION
• After using the clean station, you should
close the dustbin by pressing the bottom
cover firmly until you hear it 'click'.
English 37
Publicidad
