Descargar Imprimir esta página

Buffalo CU485 Manual De Instrucciones página 4

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 27
EN
Pack Contents
The following is included:
Induction food warmer
Buffalo prides itself on quality and service, ensuring that at the time of unpacking the contents are
supplied fully functional and free of damage.
Should you find any damage as a result of transit, please contact your Buffalo dealer immediately.
Installation
Place the unit on a heat-resistant surface. Avoid placing it on or close to easily flammable materials.
Maintain a distance of 20cm (7 inches) between the appliance and walls or other objects for ventilation.
Keep all ventilation openings in the appliance clear of obstruction.
Cookware
Suitable cookware includes:
All magnetic pans such as Vogue Stainless Steel or
Triwall pans.
Mild steel or plain steel (black iron) pans
Enamelled/non-enamelled cast iron and iron pans
Cookware diameter: 12cm - 26cm
Unsuitable cookware includes:
Cookware with a diameter less than 12cm
Ceramic or glass cookware
Stainless steel with no/weak magnetism, aluminium,
bronze or copper cookware unless marked as
suitable for induction cooking
Cookware with feet
Cookware with a rounded bottom (e.g. wok)
Operation
This appliance is intended for heating and keeping food warm in suitable chafing dishes or directly via
cookware. Any other use may lead to damage of the appliance or personal injury.
This appliance is also designed to suit with the Olympia induction chafer (Model FT038 matches Model
CU485; Model FT037 matches Model CU486).
1. Place suitable cookware on to the centre of the glass plate.
2. Connect the appliance to the mains power supply.
3. Turn the thermostat to select temperature. The temperature will appear on the display.
4. After use, turn the thermostat to "0" to switch off.
Auto shut-off: The appliance will shut off automatically when left idle for about 4 hours.
Note: If unsuitable cookware or no cookware is present the appliance will beep constantly and the
display will show "E0".
Note: During operation, take care of your rings, watches and similar objects as they may become hot.
4
CU485-CU486_ML_A5_v2_20230602.indb 4
CU485-CU486_ML_A5_v2_20230602.indb 4
Instruction manual
2023/6/2 11:47:07
2023/6/2 11:47:07

Publicidad

loading

Este manual también es adecuado para:

Cu486