Homak Professional BG01042081 Guía De Utilización Y Directivas De Funcionamiento página 3

Attaching Canopy to 42" Black Satin
Roller Cabinet.
To attach the 42" Black Satin Canopy to
the 42" Black Satin Roller Cabinet (sold
seperatly) use two people to place the
Canopy onto the Roller Cabinet. Line up the
Attachment Plates with the holes on the
back of the Canopy and Roller Cabinet and
use 2 screws and 2 washers from hardware
bag (Part E) on each plate to secure. Be
sure to do this on both sides to make sure
the Canopy and Roller Cabinet are safely
and securly attached.
Slide lift handle (Part A) into
slits and use 2 screws from
Hardware Bag (part E) to
secure to Canopy. There is one
handle on each side.
To install Stainless Steel
Worksurface (*Included with 42"
Black Satin Roller Cabinet) Use
Two People to Slide the board
into the slits at the bottom of the
canopy.