Publicidad
Idiomas disponibles
Idiomas disponibles
EN
SUCTION CUP WITH VACUUM PUMP
Introduction
Suction cup with vacuum pump and
COLOTOOL
pressure gauge suitable for
®
lifting, moving and transferring any mate-
rial with a smooth, flat and non-porous
surface. Its 20 cm diameter with vacuum
pump is perfect for handling large format
ceramic tiles.
Very easy to use, it is
equipped with a pressure gauge that will
indicate the loss of suction or the need to
pump again to obtain the optimum
vacuum load on the suction cup. It also
has a manual pressure release valve, so
that it can be easily removed from the
material to which it is attached, as well as
a tab for the same purpose. It has an
ergonomic handle for greater comfort.
It includes a practical case-suitcase to
protect it and transport it with maximum
comfort and safety.
Compliant use
This tool is only used for loading and
handling ceramic materials, slabs, tiles,
glass. Any other use or non-compliant
handling of the tool may cause serious
hazards. The manufacturer declines all
responsibility for damage caused by
irresponsible use or use not in accordan-
ce with this manual.
Features
Ref:
Ø Diameter
20466
200 mm
7
Maximum load capacity
150 kg horizontal / 100 kg. vertical
2
3
1. Suction pump plunger.
2. Pressure release button.
3. Comfort handle.
4. Instant release tab.
5. Suction platform.
6. Air filter.
7. Pressure gauge.
2
4
5
7
4
1
5
6
Publicidad
