Hinkley OLIVER 50 Manual De Instrucciones página 12

INSTALLING THE BLADES
10 | hinkley.com
CAUTION: Remove the two rubber packing mounts from the fan
motor assembly and discard prior to attaching the blades.
Insert the blade through the slot on the housing. Align the holes
on the blade and the fan motor assembly and secure with the
blade support plates and blade attachment screws.
Cordless power screwdrivers are NOT recommended,
for final tightening to fully compress the washers. This
Blades
Blade support plates
Lock Washers
Screws
NOTE:
as they usually strip the heads of the screws and
usually will not fully compress the lock washers on
the motor screws. Use a large flat blade screwdriver
will help ensure proper alignment of the blades and
noise-free, wobble-free running.