Hinkley OLIVER 50 Manual De Instrucciones página 13

INSTALLING THE LED ASSEMBLY
NOTE: Be sure the power is off before installing.
While holding the LED assembly under your fan, make the
1
polarized plug connections:
- White to white
- Black to black
Position the notches on the inner edge of the LED light kit so
2
they match the tabs on the outside of the rim on the light kit
mounting plate. Carefully lift the LED light kit inside the light
kit mounting plate and secure it to the fan by turning the LED
light kit clockwise until snug.
Restore power and your LED assembly is ready for operation.
3
Wire connectors
LED
assembly
©2023 Hinkley Lighting, Inc.
| hinkley.com | 11