Intuis TACTIC WIFI Manual Del Usuario página 58

INSTALLATION AND WALL MOUNTING
This appliance must be mounted on the wall for use, using the backplate provided.
For easy installation and to ensure at least a minimum clearance of 150 mm from
the bottom of the appliance to the floor (Fig. D):
∙ release the backplate by pinching and pulling the two insertable tabs on the back
of the appliance (location 1 Fig. D).
∙ use the backplate as a marking template by placing it on
the floor against the wall. Insert a sharp object through
the holes in the backplate (location A Fig. C & D) to mark
the lower fixing points.
∙ reposition the backplate to line up the marks with the
lower fixing holes.
∙ check to ensure that the backplate is horizontal, mark
the top 2 fixing holes, then drill and plug the holes at the
4 marked locations.
∙ replace the backplate on the wall and fix it with four
5.5mm max. diameter screws.
Note : To centre your
appliance laterally, use
the hole at location 2
Fig. C & D.
58.
1500 => 2500W
2
Power ratings
Appliance height (mm)
A (mm)
B (mm)
C (mm)
500W=> 1000W
500 => 1250W
2
500W 1000W 1500W
440 440 440
340 420 580
128 208 178
106 106 201
500=>1000W
A
A
2
B 28
Fig. C
Fig. D
1
2000W 2500W
440 440
740 900
320 405
210 248