Coredy SL200 Manual De Usuario página 14

Connect with Coredy App
Open the app and create a user account, and then
follow the instruc�ons to add your SL200 robot.
(Refers to "App Installa�on Guide" for detailed
guidance.)
Rese�ng Wi-Fi
When switching to a new router or changing your
Wi-Fi password, you will need to reset the device's
Wi-Fi connec�on. To do so, turn on the device, then
simultaneously press and hold the bu�ons
for 10 seconds un�l you hear a voice saying "Rese�ng
the Wi-Fi connec�on and entering network configura-
�on mode". Once the Wi-Fi connec�on is reset, you
can reconnect the device.
Restoring Factory Se�ngs
Press and hold the bu�on
will hear two beeps. Then press and hold the bu�on
for 5 seconds again, and the factory rese�ng will
be restored once you hear a voice saying "System
reset successfully", it means the system has been
restored successfully.
and
for 5 seconds and you
Installing accessories for the desired mode
Vacuuming Mode: Install the dust bin (or install the
2-in-1 dust bin with water reservoir*)
1. Open the cover of the robot, install dust bin (or
install the 2-in-1 dust bin with water reservoir*) un�l
it locks into place.
2. Power on the robot, it is now ready to start cleaning.
1
2
12