Descargar Imprimir esta página

Buddy Toys BEC 7110 Manual Del Usuario página 3

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 34
CHARGER - SAFE OPERATION
• Before charging, check that the voltage in your power grid corresponds to the parameters on the charger.
• Only use the original charger supplied by the manufacturer.
• The charger is not a toy. Charging may only be performed by an adult.
• The connector on the rechargeable battery must correspond to the respective connector on the charger.
• Do not place the device into water or expose it to rain or water.
• Disconnect the device from the mains power supply when not in operation.
• If ventilation openings are a part of the construction, do not clog them or open up the power supply part. Do not cover the
charger during the charging process.
• The power cord must not be replaced. If the power cord is damaged, the device must be disposed of. Store in a clean condition
in a dry and dark place.
• This device is not designed to be used by persons (including children) with limited physical or psychological abilities or by
persons with insufficient experience and knowledge of operation unless under supervision or unless they are provided with
instructions about the operation of the device by the person responsible for the safety of these people.
• Adhere to all safety instructions to prevent damage to property or injuries.
• In the event that during the changing process you have a suspicion of any type of electrical fault (smell, overheating, change in
colour, deformation), immediately disconnect the charger from the mains and do not use it any more. If you have a suspicion
that water has entered the electrical components, take the device to a specialised service centre to eliminate any possible
damage to the protective insulation of the product.
STORAGE AND MAINTENANCE
Store the product in a clean condition in a dry and dark place. Clean with a dampened lint-free cloth. Do not use aggressive or
abrasive cleaning products for cleaning. After use, clean and dry using a dry cloth.
ECOLOGICAL DISPOSAL
At the end of their lifetime, neither the electrical device, nor battery packs, nor used batteries may be disposed of as unsorted
communal waste. Take the used products to appropriate local collection points in accordance with local municipal codes. Ask your
local authorities or collection facility for more details.
DECLARATION OF CONFORMITY
This product has been brought on to the market in accordance with the requirements of all EU harmonisation regulations. Directive
No. 1999/5/EC R&TTE. FAST a.s. declares that this product conforms to the basic requirements and other relevant provisions of
Directive 1999/5/ES. The declaration of conformity is available at the company website www.fastcr.cz.
INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING MATERIALS
Dispose of packaging material at a public waste disposal site.
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES
The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be
treated as household waste. Please, dispose of this product at your applicable collection point for the recycling
of electrical & electronic equipment waste. Alternatively in some states of the European Union or other European
states you may return your products to your local retailer when buying an equivalent new product. The correct
disposal of this product will help save valuable natural resources and help in preventing the potential negative
impact on the environment and human health, which could be caused as a result of improper liquidation of waste.
Please ask your local authorities or the nearest waste collection centre for further details. The improper disposal of
this type of waste may fall subject to national regulations for fines.
For business entities in the European Union
If you wish to dispose of an electrical or electronic device, request the necessary information from your seller or
supplier.
Disposal in other countries outside the European Union
If you wish to dispose of this product, request the necessary information about the correct disposal method from
local government departments or from your seller.
This product meets all the basic EU regulation requirements that relate to it.
Changes to the text, design and technical specifications may occur without prior notice and we reserve the right to make these
changes.
Address of the importer: FAST ČR, a.s., Černokostelecká 1621, 251 01 Říčany, Czech Republic
EN–3

Publicidad

loading

Este manual también es adecuado para:

Bec 7111