EGO HT2600 Manual De Instrucciones página 12

 Never remove or tamper with safety devices . Check their proper operation regularly .
Never do anything to interfere with the intended function of a safety device or to
reduce the protection provided by a safety device .
 Never operate the hedge trimmer without proper guards, plates, or other safety
protective devices in place .
 Check damaged parts before further use of the hedge trimmer . A guard or other
part that is damaged should be carefully checked to determine that it will operate
properly and perform its intended function . Check for alignment of moving parts,
binding of moving parts, breakage of parts, mounting, and any other condition that
may affect its operation . A guard or other part that is damaged should be properly
repaired or replaced by an authorized service center unless indicated elsewhere in
this manual .
 Check the blade and motor mounting bolts at frequent intervals for proper tightness .
Also, visually inspect blade for damage (e .g ., bent, cracked, and worn) . Replace the
blade only with a blade from the original equipment manufacturer (OEM) .
 Replace the blade if it is bent or cracked . An unbalanced blade causes vibration that
could damage the motor drive unit or cause personal injury .
 If the equipment should start to vibrate abnormally, stop the motor and check
immediately for the cause . Vibration is generally a warning of trouble .
 The trimmer shall be used to cut stems less than 1 .2 in . (30 .5 mm) thick .
 Trim only in daylight or in good artificial light .
 Remove or disconnect battery before servicing, cleaning, or removing material from
the hedge trimmer .
 Do not wash with a hose; avoid getting water in motor and electrical connections .
 When servicing use only identical replacement parts listed in this manual . Use of
parts which do not meet the original equipment specifications may lead to improper
performance and compromised safety .
 Do not incinerate the appliance even if it is severely damaged . The batteries can
explode in a fire .
 Follow instructions for lubricating and changing accessories .
 Keep handles dry, clean and free from oil and grease .
 Check the hedges and bushes for foreign objects, e .g . wire fences and hidden wiring
before operating the machine .
 Save these instructions. Refer to them frequently and use them to instruct others
who may use this machine . If you loan this machine to someone else, also loan
these instructions to them to prevent misuse of the product and possible injury .
12
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HT2600/HT2600-FC
SAVE THESE INSTRUCTIONS!