Goldstar M8003R Manual Del Propietário página 12

9. Attach each Frame curtain the window sash
using screws _Type C),(See Fig, 6)
CAUTION: DO NOT DRILL A HOLE IN THE
BOSOM PAN,
The unit is designed to operate
with approximately 1/2" of water in
bottom pan,
10. Slide the unit into the cabinet(See Fig, 7)
CAUTION: For security purpose, reinstall
screws(Type A) at cabinet's sides.
Screw(Ty_ A)
........ Power cord
f
Screw(Type A)
11. Cut the foam-strip ® to the proper length
and insert between the upper window sash
and the lower window sash.
(See Fig. 8)
F_m-Strip Q
12. Attach the window locking bracket @ with
a type C screw (See Fig. 9)
Window locking bracket @
13. Attach the front grilte to the cabinet by
inserting the tabs on the grille into the tabs
on the front of the cabinet, Push the grille
in until it snaps into place. (See Fig,10)
14 Lift the inlet gdlle and secure it with a type
A screw through the front grille,
(See Fig. 11)
15, Window installation of morn air conditioner
is now completed, See ELECTRICAL DATA
for attaching _wer cord to electrical outlet,
Fig, 10
Fig. 11