Tascam BD-MP1 MK II Manual Del Usuario página 31

3.
Select the target folder, and press the ENTER button.
Files inside the folder will be shown.
(Example: Music folder open)
4.
Use the j/k cursor buttons to select a file and press the 7
button to start playback.
When a file is selected, the following information appears
on the right side of the monitor.
o Thumbnails of image files
o Various information for audio and video files
Playing USB flash drive/SD cards playlists
To play these with the unit, connect them to a USB port or SD
card slot.
NOTE
There are USB ports on both the front and the back of the
unit.
While the medium is being read, "LOAD" appears on the display,
followed by one of the items below when reading completes.
USB flash drive : USB
SD card: : SD
NOTE
o Media files in playlists will be played back in the order that
they were selected.
o If media is disconnected, files on that media will be removed
from the playlist.
o Turning off the power will erase the playlist.
Adding files to a playlist
1.
Select Media on the HOME screen and press the ENTER
button.
Media icons will appear. Use the j/k cursor buttons to
select an SD/USB icon and press the ENTER button.
2.
Opening the selected icon will show the following folders.
: Top folder
..
Photo : Photo folder
Music : Audio folder
Video : Video folder
AVCHD : High-quality video folder
NOTE
Playlists can only include image, audio or video files.
A playlist cannot contain different types of files. (For example,
it cannot contain both image and video files.)
3.
Select the file to add to the playlist, and press the TITLE/POP
UP button to open a pop-up message.
4.
Use the j/k cursor buttons to select "Add to Playlist",
and press the ENTER button to add the selected file to the
playlist.
o When a file is selected, press the ; cursor button to add a
check mark before the file name, selecting it.
Select a file again and press the ; cursor button to remove
its check mark.
31
TASCAM BD-MP1MKII