Descargar Imprimir esta página

M-system PRF 1060 Instrucciones De Uso página 115

Publicidad

Idiomas disponibles

Idiomas disponibles

3 - USE OF COOKING HOB
GAS BURNERS
Each burner is controlled by a gas tap
assuring the opening and the closing of
the gas supply.
Make the lever of the knob match with the
indicator on the control panel to obtain:
– symbol
– symbol
– symbol
To reduce the gas flow to minimum,
rotate the knob anti-clockwise to point
the lever towards the small flame sym-
bol.
The maximum aperture position permits
rapid boiling of liquids, whereas the min-
imum aperture position allows slower
warming of food or maintaining boiling
conditions of liquids (simmering).
Other intermediate operating adjust-
Fig. 3.1
: off
: full on
(nominal rate)
: reduced rate
ments can be achieved by positioning
the lever between the maximum and
minimum aperture positions, and never
between the maximum aperture and off
positions.
LIGHTING THE BURNERS
To ignite the burner, the following
instructions are to be followed:
1) Lightly press and turn the knob anti-
clockwise, and position the knob
indicator to the symbol
the control panel (fig. 3.2).
2) Press the knob to operate the electric
ignition; or, in the case of a mains
failure light the burner with a match or
lighted taper.
3) Adjust the burner according to the
setting required.
printed on
Fig. 3.2
115

Publicidad

loading