Publicidad
Idiomas disponibles
Idiomas disponibles
2. If the agitator has a blockage or is locked, once actioned, the agitator will stop rotating and the WHITE LED light on the
nozzle will turn to RED. [14] If this happens, simply turn off your product and clear the agitator obstruction. To resume
cleaning, press the on/off button and the product will start working again.
BATTERY
This cleaner is equipped with a Battery Status LED Light. When the product is ON, the LED light illuminates in two colors
to show the battery level:
BATTERY LEVEL:
White color:
charge
Red color blinking:
charge
There are 2 methods of charging:
Charge the battery when fitted to the product.
Insert the battery charger jack to the battery. The LED status indicator will illuminate RED when charging. When charging
is complete, the LED status indicator will illuminate WHITE for 1 min then switch off. [7]
Charge the battery when removed from the product.
Remove the battery from the product by pressing the battery release button.
Insert the battery charger jack to the battery. The battery pack LED will illuminate RED when charging. Once charging is
complete, the LED indicator will illuminate WHITE. [8]
NOTE: It is normal for the charger to become warm to touch when charging. Use only the charger supplied with your
product.
ACCESSORIES
CREVICE TOOL INTEGRATED ON THE HANDHELD , CREVICE TOOL INTEGRATED ON THE TUBE, 2IN1 FURNITURE
TOOL & DUSTING BRUSH, LONG CREVICE TOOL*, MINI POWER NOZZLE* AND DUST BIN CLEANING TOOL*.
Integrated Crevice Tools - ideal for accessing tight spaces.
Dusting Brush - ideal for cleaning surfaces without damaging or scratching.
Furniture Tool - ideal for cleaning surfaces like sofa.
Mini Power Nozzle* - ideal for deep cleaning textile surfaces (i.e. sofas) and pet hair removal. The working angle can be
adjusted when move backwards and forwards.
NOTE: After using, please rotate agitator release flap anti-clockwise with a coin to take out the agitator, and then remove
hair / threads collected on the brush. [18]
All the accessories except dust bin cleaning tool can be fitted on the main product and on the tube. [4]
Long Crevice Tool* - Ideal for tight and difficult areas.
Dust Bin Cleaning Tool* - ideal to remove the dust, debris and hairs inside of dust bin. [9]
ACCESSORY BAG*
Accessories can be stored in the accessory bag.
Wall Mount*
If required, fix the wall mount to the wall, using the two screws and plugs provided. [2]
CLEANER MAINTENANCE
Pre-filter maintenance reminder. If the pre-filter needs maintenance, the LED light on the cleaner starts to blink in red colour.
Emptying the Dust Container
1. Press the main body release button and remove the tube. [5]
2. Press the dust cup empty button to release the bin flap and empty the contents. [9a]
3. Close the dust cup flap, you will hear a click when fully locked.
NOTE: It is recommended to empty the dust cup after each use or when dust is up to the max fill line.
Quick Daily Cleaning of Dust Container
Just open the dust bin flap and remove the dust with the help of the dust bin cleaning tool.
1. Use the hook end to pull out the dust collected inside the dust bin. [9b]
2. Use the brush end to clean the fine dust stuck around the metal mesh filter. [9c]
* Certain Models Only
7
GB
Publicidad
