GE 26 Manual Del Propietario Y Instalación página 19

Installation Instructions
[] REMOVE THE FREEZER DOOR
_'1 Pullthe freezer door open to full extension.
[] Removethe freezer bin by pulling both brackets upward
at the same time. (Seepage 10.)
[] Take out the lower basket by lifting the basket up from
the rail system. (Seepage 10.)
rD-] Removethe two 10 mm hex-head bolts from the right
and left side.
REMOVE THE FREEZER DOOR (cont.)
Usethe tip of a screwdriver to separate the rail from
the rail cover.Tilt the front end up and lift the entire door.
D Set the door front on a nonscratching surface.
r_ Pushthe rail assemblies back into the cabinet.
-& CAUTION:
P ushboth sides of the rail
assemblies back at the same time.
[] REPLACING THE FREEZER DOOR
Two people may be required to complete this procedure.
ATTACH AND SECURE THE DRAWER FRONT TO
THE SLIDES
_] Pullout the rail assemblies to the full length on each side
of the cabinet.
CAUTION:
Make sure to pull out the side
rails evenly.
19