Descargar Imprimir esta página

GE 26 Manual Del Propietario Y Instalación página 4

Refrigeradores congelador inferior

Publicidad

Idiomas disponibles

Idiomas disponibles

About the controls with temperature settings.
Not all features are on all models. Your controls will look like one of the following:
f
Energ?l
Sever
I Adjust _l
F .....
!3
Cubed
Crushed
Water
- Alarml
Light .,J
Light ONIOFF
(Hold 3 seconds}
¢1¢e
Off> _']
L LookJ
(Hold 3 sec
to Lock Control}
"x
Location of Dispenser Controls
Dispenser Models
.20
F Recommended
38 _ _ Recommended
Internal Control Hodels
Location of Internal Controls
NOTE:Therefrigerator is shipped with protective film covering the temperature
controls. If this film was not removed during installation, remove it now.
The temperature controls are preset in the foctorg at38°F for the refrigerator
compartment and -2°F for the freezer compartment. Allow 24 hours for
the temperature to stabilize to the preset recommended settings.
The temperature controls can displag both the SET temperature as well as
the actual temperature in the refrigerator and freezer. The actual temperature
mag varg slightlg from the SETtemperature based on usage and operating
environment.
__ FAdjust_
reezer__
rigerat_
Changing
the Temperature
Dispenser
models:
To change the temperature, press and release
the Adjust Freezer or Adjust Refrigerator pad.
The display will show the actual temperature.
Tap either the Adjust Freezer or Adjust Refrigerator
pad until the desired temperature is displayed.
Once the desired temperature has been set,
the temperature display will return to the actual
refrigerator and freezer temperatures after
10 seconds. Several adjustments may be required.
Eachtime you adjust controls, allow 24 hours
for the refrigerator to reach the temperature you
have set.
_Freeze
9
_-Fridge_
Internal
control models:
To change the temperature, press and release
the Freezer or Fridge pad. The display will show
the actual temperature. Tap either the Freezeror
Fridge pad until the desired temperature is displayed.
Once the desired temperature has been set,
the temperature display will return to the actual
refrigerator and freezer temperatures after
10 seconds. Several adjustments may be required.
Each time you adjust controls, allow 24 hours
for the refrigerator to reach the temperature
you have set.
4

Publicidad

loading