Publicidad
Idiomas disponibles
Idiomas disponibles
EN
INSTRUCTION MANUAL
PRODUCT'S PRESENTATION
This Infrared Thermometer is a non-sterile, reusable,
handheld device. It can be used by consumers in
homecare environment and doctors in clinics in order to
measure the human body temperature of people aged
three months and above by detecting infrared heat from
the center of the forehead.
- The clinical thermometer is an adjusted mode clinical
thermometer.
- The patient can use and maintenance the device as
an operator.
- For safe and proper use of this product, be sure to
read
and
fully
understand
contained in this user manual.
- Keep this manual with you for a convenient reference.
- Keep this manual in a proper way and avoid any loss.
- If you need other information, please contact the
manufacturer.
CORRECT MEASUREMENT METHOD
The correct measurement method
to follow is to measure the
forehead at a distance from
15mm to 50mm:
Instructions for use
1. Turn the thermometer on by
pressing the "ON/OFF/MEASU-
RE" button. To choose mode,
press "ON/OFF/MEASURE" on
the shutoff mode. A beep sound
will be heard and the screen will
flash with the symbol ---ºC,
indicating the unit is ready for use.
2. Place the thermometer probe
point near the forehead and press
release after ∼ 1 second. The
"ON/OFF/MEASURE"
thermometer
display the accurate temperature.
Whenever consecutive readings
are required, please wait for the
---ºC to flash. The above procedu-
re can be repeated as many times
as required.
3. To turn off the device:
ASURE" switch for ∼ 5 seconds
Press and hold the "ON/OFF/ME-
automatically after ∼ 60 seconds.
The thermometer will turn off
If a reading below 32ºC is recorded a "Lo" sign will be
displayed followed by 2 consecutive beeps.
If a reading above 37.8ºC is recorded there will be 6
consecutive beeps.
If a reading above 42.2ºC is recorded a "Hi" sign will be
displayed followed by 2 consecutive beeps.
DESCRIPCIÓN DEL PRODUCTO
Safety
Precautions
INFORMACIÓN EN PANTALLA
- Location indication: the icon flashes to indicate the
correct measuring position when measuring.
- Temperature data indication: the temperature reading
is displayed after measuring.
- Temperature unit indication: unit of measuring
temperature shows ºC or ºF.
- Low battery symbol indication: the icon prompts you to
replace the battery when the power is low.
- Memory symbol indication: it shows in memory query
mode currently.
LOADING AND REPLACING BATTERIES
When the battery icon "
battery immediately:
and
1. Press and hold the battery cover.
2. Push it upward diagonally to push the cover away.
will
beep
and
3. Install the 2*AAA batteries as shown in the positive
and negative pole.
Take out the battery if you do not use the thermometer
for a long time.
7
1
Probe
2
ON/OFF/MEASURE switch
3
Unit Body
4
LED screen
5
Battery cover
Location indication
1
2
Temperature unit
3
Temperature data
4
Battery symbol
5
Memory symbol
WARNING!
REF. 53794
" is flashing, replace a new
Publicidad
