Irradio STV-IR-2242-FIX Manual Del Usuario página 5

STV-IR-2242-TILT
Fixed wall bracket for 22"(55,88cm) - 42" (106,68cm) TV
ASSEMBLY GUIDE
Please, read the instructions carefully and keep them for future reference.
Do not use this appliance for purposes other than those described.
Safety information and specifications
CAUTION: Do not use this product for any purpose not explicitly specified.
Using for other cases may cause properly damage or personal injury. On the other side if you cannot
understand of instruction or doubts about safety of this, contact to your customer service or call a
qualified contractor. Melchioni is not responsible for any damage or injury due to incorrect instal-
lation or use. The weight of your TV should not be more than 40 kg. The wall must be capable of
supporting weight of your TV and wall mount together. Keep these times away from young children.
Tools required for installation and package contents
Check the parts in the package in comparison with the following list. Make sure that, all of parts are
in the package. Do not replace part with different specifications.
(a)
(a)
(b)
(b)
a - 1 pc main plate
b - 2 pcs carrier arms
c - 4 pcs plastic dowels
d - 4 pcs triphone screws
Installation
Adjust the main plate to the appropriate height,
keep it horizantal and mark the holes with
a pencil (Figure 1).
Drill the marked places with a drill, then insert
the plastic dowels into the holes (Figure 2).
(e)
(c) (e)
(d) (f)
e - 4 pcs M6*15 screws
f - 4 pcs M4*15 screws
g - 4 pcs M5*15 screws
h - 1 pc bubble level
ENG
(g)
(h)
(figure 1)
(figure 2)