Canyon CND-GPW02 Manual Del Usuario página 3

Ⅱ. Connect to Android Devices:
1) Turn on the Bluetooth function of
Android device and search device;
2) Press «X» and «HOME» keys
simultaneously on the controller,
until the LED1 and LED4 quickly
flash;
3) Find the device named «CND-
GPW02» on the Android and then
click the «Pair'' button, the LED1
and LED4 light constantly means
successful connection.
* This Bluetooth controller supports HID mode games on the Android device.
Press the «HOME» key to switch to digital mode; the left joystick function and cross
key function are interchanged in digital mode, while other key functions remain the
same as before.
Note: On the Android device, the vibration function, screenshot, and
somatosensory functions are not available on the wireless controller.
Ⅲ. Connect to IOS Devices:
1. Turn on the Bluetooth function of
IOS device and search device;
2. Press «A» and «HOME» keys
simultaneously on the controller,
until the LED1, LED2 and LED3
quickly flash;
3. Find the device named «Xbox
Wireless Controller» on the IOS,
and then click the «Pair'' button,
the LED1, LED2, and LED3 light
constantly means successful
connection.
The Bluetooth controller supports MFI games on the IOS device
Note:This wireless controller only supports the IOS13.0 version or above system.
The vibration function, screenshot, and somatosensory functions are not available.
Ⅳ. Connect to Windows PC:
1. Wired cable connection
Connect the controller directly to the Windows PC via the USB A-C cable included
in the package, the LED1, LED2, and LED3 light constantly means successful
connection.
* This controller supports X-INPUT mode games and Steam on Windows systems.
Note: This controller only supports Windows 7 and above system. The screenshot
and somatosensory functions of the controller are not available.
2. Wireless connection
2.1 Press ''Y» and «HOME» keys
simultaneously on the controller, until
the four signal lights flash quickly back
and forth, and then wait for successful
connection.
2.2 Plug in the Mini USB receiver to PC
USB port.
2.3 The controller will connect the
receiver after 3-5S, LED1 & LED4 will
long on and there is 1S vibration to show
successfull connected.
Note:
This controller only supports Windows 7 and above system. The screenshot
and somatosensory functions of the controller are not available.
Ⅴ. Connect to Tesla Motors:
1. Press ''Y» and «HOME» keys simultaneously on the controller, until the four
signal lights flash quickly back and forth, and then wait for successful connection.
2. Plug in the Mini USB receiver to USB port of Telsa motors.
3. The controller will connect the receiver after 3-5S, LED1 & LED4 will long on
and there is 1S vibration to show successfull connected.
Special prompt: The above connection modes Ⅰ, Ⅱ, Ⅲ, Ⅳ & Ⅴ can be re-connected
by pressing the HOME key after the first connection, but please note the re-connect
function only works when the last connected device is the same as this time, for
example, you can't wake up the switch console after you play with Android device
Turbo Function
Turn off the Turbo function: press and hold the Turbo button then press the
function key such as «A» which has set the auto Turbo function before, the Turbo
function of the button «A» has been turned off.
Close the Turbo function of all keys one time: press and hold the Turbo button for
5 seconds, the four signal lights flash for 3 times, and the controller shocks once,
which means that the turbo function of all keys has been closed.
The function button: B/A/Y/X/L/ZL/R/ZR
Set manual Turbo function: press and
hold the Turbo button first and then press
one of the function buttons such as «A»,
the button «A» starts the manual turbo
function.
Set auto Turbo function: press and hold
the Turbo button then press the function
button such as «A» which has set the
manual turbo function before, the button
«A» starts the auto turbo function.
There are three levels of Turbo speed:
Slow: 5 bursts per second corresponding
to a slow flashing of the signal light.
Medium: 12 bursts per second
corresponding to a
medium flashing of the signal light.
Fast: 20 bursts per second corresponding
to a fast flashing of the signal light.
Increase the Turbo speed:
Press the Turbo button and «↑» at the
same time to increase the turbo speed.
Reduce the Turbo speed:
Press the Turbo button and «↓» at the
same time to reduce the turbo speed.