Descargar Imprimir esta página

osann Flux Isofix Manual Del Usuario página 23

Ocultar thumbs Ver también para Flux Isofix:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 62
INSTALLING THE CHILD CAR SEAT
1) Size class 76–105 cm, min. 15 months, max. 23 kg, forward facing
ATTENTION: USE ONLY FROM THE AGE OF 15 MONTHS.
1 . Place the child car seat forward facing on your car seat.
2 . Press the two side Isofi x connector buttons to extend the length of the Isofi x connectors.
3 . Guide the Isofi x connectors to the Isofi x anchor points on the car seat and snap them into place.
4 . Push the child car seat in until it rests securely against the backrest of the vehicle seat. Ensure
that both Isofi x indicators have turned green.
5 . Take the top tether from its storage pocket and extend it to the maximum length.
6 . Clip the top tether onto the hook provided in your car (e.g. on the back of the car seat or in the
boot. Please consult your car manual for this).
7 . Tighten the top tether until the display on the top tether turns green.
8 . Unfasten the belt buckle on the child car seat and place the belts over the outside of the seat.
9 . Put your child in the child car seat.
10 . Adjust the height of the headrest as described above.
11 . Fasten the belt buckle again until you hear a click.
12 . Pull the front adjustment strap to tighten the belts. Ensure that the straps are not twisted.
13 . Install the side impact protector as previously described.
- 23 -
EN

Publicidad

loading