Unlocking Your Phone; Connecting To The Network; Making A Call; Making A Domestic Call - Leotec L-PHONE XENON X153 Manual De Usuario

should immediately change this number. See "Safety settings"

2.4.4 Unlocking your phone

To prevent unauthorized use, you can set phone protection. If you have selected this function, you
must draw unlocking pattern each time you turn on your phone, to unlock the phone and then make
or answer calls. You may clear the unlocking pattern (see Safety settings). In this cause, the
unauthorized use of your phone cannot be protected.
If you forget your phone password, you must contact the retailer or local authorized service center
to unlock the phone.

2.4.5 Connecting to the network

Once your SIM card is unlocked, your phone searches for available network automatically
(the screen will show the network searching is underway). If your phone has found the available
network, the name of network service provider appears at the center of screen.
Note: If "only for emergency calls" appears on the screen, it indicates that you are beyond the
network coverage (service area), and that you can still make emergency calls depending on the signal
intensity.

2.4.6 Making a call

When the logo of network service provider appears on the screen, you can make or answer a call.
The bars at the upper left corner of screen indicate the intensity of network signal.
Conversation quality is significantly affected by obstacles, thus moving within a small area while
making or answering a call can improve the conversation quality.

2.4.7 Making a domestic call

In the Dial screen, enter a number, and press the Dial key to make a call. To change the
number, delete the digits you have entered. During dialing, the animation appears on the
screen. After the call is picked up, the screen will show call status information. If the
connection alert tone has been set, your phone will ring the alert tone (network dependent).
To end a call, press the Hang Up key.
Zone code Phone number

2.4.8 Making an international call

To make an international call, hold down the 0 key on the Dialing screen until the international
prefix "+" for appears. This allows you to dial an international number without knowing its
international fix (e.g. 00 for China).
Following the entry of international prefix, enter the country code and complete phone number.
For the country codes, follow the general conventions, for example, 49 for Germany, 44 for UK, and 46
Dial key
38