Cleaning And Storage - JOCCA 1102 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

16-EN
-Press the ON switch and place it in the I position. Immediately
afterwards, the green light will switch on, indicating that the
water is being cooled.
When the water reaches its minimum temperature (10º C), the
green light will switch off and the yellow one will switch on.
-Consider that the temperature of the cold water will rise slowly
until reaching 15ºC and then it will cool again until it completes
the cycle from 10ºC to 15ºC.
-In order to get cold water, press the blue-colored faucet and, in
order to get water at room temperature, press the white-colored
faucet.

CLEANING AND STORAGE

-Before cleaning the appliance, make sure it has been
disconnected from the mains.
-Do not use abrasive detergents or products that may damage
the appliance.
-Use a damp cloth or sponge to clean the outside of the appliance
afterwards use a dry cloth.
-NEVER IMMERSE THE APPLIANCE IN WATER OR ANY OTHER
LIQUID.
-It is recommended that the cooling tank should be filled and
drained before using it for the first time and should be drained
every month before filling with fresh water.
-The product can be cleaned with a sterilizing agent.
-Ensure this is completely flushed through before resealing and
filling with drinking water.
-Drain surplus water through the white drainage cap located
underneath and then replace the drainage cap.
-Fill the tank with fresh water and then drain off the water,
repeating step.
-To clean a motor, disassemble a back side of a device using a
screwdriver.
With any dryer and its maximum air flow mode apply air to
remove excessive dust or dirt that a motor might contain.
-Keep the appliance with the empty tank in a sure and dry place
and tturn off the water dispenser of the electricity if he's not
going to be used during a time.
TECHNICAL SPECIFICATIONS
220-240V~ 50Hz 65W
Climate typel: N
This device conforms to the safety requirements and provisions
of directives 2006/95/EC on Low tension devices and 2004/108/
EC on Electromagnetic Compatibility.
PROTECTION OF THE ENVIROMENT – DIRECTIVE 2002/96/EC
This product has been designed and manufactured with high
quality materials and components that can be recycled and
reused.
When you see the symbol of a crossed out litter bin on
wheels next to a product, this means that the product
conforms to the European Directive 2002/96/EC.
Please obtain information about the local recycling system
for electric and electronic products.
Follow the local rules and do not dispose of used products by
throwing them in the normal bins at home. Proper recycling
of your used product will help avoid negative impacts on the
environment and people's health.
EN-17

Hide quick links:

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

1102m

Tabla de contenido