AMiO YF610B Manual Del Usuario página 2

EN
Ensure that it is well lit. Insufficient lighting or a messy
work area can cause accidents.
The floor on which the compressor is placed must be solid,
stable and durable.
Keep children and bystanders away from areas where the
compressor is used.
Do not distract the user while working with the device may
result in loss of control and personal injury.
To prevent dangerous situations from arising, the
operator should check the correct operation of the device
at all times.
COMMISSIONING AND OPERATION
a. ASSEMBLING THE MACHINE COMPONENTS
To install one of the adapters, screw it into the hose.
b. MINIMUM MACHINE OPERATING CONDITIONS
The compressor is not intended for commercial use. It can
run for a maximum of 10 minutes, after which time it must
be disconnected from the power supply and allowed to
cool down for a minimum of 10 minutes. Prolonged use
may cause the compressor to overheat and seize. When
the compressor is used to inflate tyres on motor vehicles,
take an additional measurement with an approved
pressure gauge, the values indicated on the built-in
pressure gauge are for reference only.
Check the correct pressure for the object to be inflated,
never exceed the maximum values!
REQUIREMENTS FOR OPERATORS
The operator must observe the operation of the machine
at all times in order to prevent a possible accident. The
machine must not be operated under the influence of
alcohol, drugs or similar. The user must, before the first
start-up, read this operating manual and check that all
machine components are in perfect, factory condition.
USE OF PROTECTIVE EQUIPMENT
INDIVIDUAL PROTECTION MEASURES
Use protective goggles, gloves to increase user safety.
ADJUSTMENT, MAINTENANCE, REPAIR
• check the power cable for damage
• the contacts of the plug and socket are clean
• Check that the socket fuse has not blown (for proper
compressor operation the socket should be fused with
a minimum value of 15 A).
DO NOT MODIFY, REPAIR MACHINE ON YOUR OWN, as
this may change structural elements, which may have a
significant impact on user safety.
In the event of a malfunction, go to an authorised service
centre.
ENVIRONMENTAL PROTECTION
To prevent damage during transport, the appliance
is packed. This packaging is raw material that can be
reused or recycled.
The appliance and its accessories consist of various
2
materials, such as metal and plastic.
Please take damaged appliance parts to a recycling
collection point. Recycling as an alternative to the
obligation to return the appliance: As an alternative
to the obligation to return the appliance at the end of
its useful life, the owner is obliged to participate in its
proper disposal. The end-of-life unit may also be taken
to a recycling collection point, which will dispose of it in
accordance with the national regulations concerning
waste and the use of secondary raw materials.
DECLARATION OF CONFORMITY
Product model/SEE identifier: 01134/YF610B
Name and address of the manufacturer Amio Sp. z o.o.
ul. Handlowa 3, 41 - 807 Zabrze
This declaration of conformity is issued under the sole
responsibility of the manufacturer.
Subject of the declaration:
Name: Car Air compressor 12V/230V Acomp-02
Serial No.: 01134/YF610B
Year of manufacture: 2023
The above mentioned product complies with the
following directives
LVD 2014/35/EU standard:
EN 60335-1:2012+A11:2014
EMC 2014/30/EU and standards:
EN 61000-6-3:2007+A1:2011, EN 61000-6-1:2007
EN 61000-3-2:2014, EN 61000-3-3:2013,
EN 55014-1:2017, EN 55014-2:2015, EN 50498:2010
The EC market test was carried out by: Ente
Certificazione Macchine Srl Via Ca' Bella, 243 - Loc.
Castello di Serravalle - 40053 Valsamoggia (BO) - ITALY
+39 051 6705141 +39 051 6705156
The technical documentation is kept at the head office of
Amio Sp. z o.o. 3 Handlowa street,
41-807 Zabrze.
Other information: Manufactured in PRC for Amio Sp. z
o.o., 3 Handlowa St., 41 - 807 Zabrze
The person authorised to prepare the technical
documentation and to draw up
the declaration on behalf of, is:
President of the Board
Grzegorz Dudziak
Zabrze, 2023 r.